Fuel Gas Composition In Boiler

composite boiler gas fuel - realschule-mechernich.decomposite steam boiler in Food Industry. composite steam boiler is very important for food processing indus

Details


  • Production capacity: 0.35-14MW
  • Work pressure: 0.7-1.25 MPA
  • Applicable fuel: Bituminous Coal Lean Coal Anthracite
  • Applicable industry: Heating, Hotels, Schools, Hospitals


Product introduction

  DZL series package boiler is a horizontal three-pass water and fire pipe chain grate boiler, which uses medium-sized bituminous coal. The boiler body is vertical single drum, and the threaded pyrotechnic tube is arranged in the drum to form a convection heating surface, and the drum and the water walls on both sides constitute a radiation heating surface of the furnace. The combustion equipment uses light chain grate, the whole package is finished in the factory. The electric control makes the governor stepless speed regulation, the limit parameter alarm and the interlock protection.


Quick inquiry:
I need the quotation of , the fuel is , this capacity is , the pressure is , use for . My Name is , my Email is , my phone number is , Please Send the detail information for me!






CNC manufacturing technology:
The key processing technologies such as steel plate blanking, circling, drum and tube plate drilling adopt advanced numerical control processing to reduce the assembly stress and prolong the service life of the boiler.
Steel pipe cutting, thread pipe pressing and convection pipe processing all adopt advanced numerical control technology.
The use of arched tube sheets and threaded fire tube was first adopted in China to increase heat transfer and completely solve the problem of cracking of the rear tube sheet.                                                                                                                    
The layout of chain grate is neat and beautiful, result in front and rear smoke box panel using CNC plasma cutting machine.
Advanced welding process
The vertical and circumferential seam welding of the boiler adopts advanced automatic submerged arc welding technology to ensure the welding quality. All vertical and circumferential welds are subjected to 100% ray detection.
The welding of smoke pipe and the tube plate adopts pre-expansion to eliminate the gap between the tube and tube plate, then be welded by automatic argon arc. Which effectively eliminate stress and prolong boiler life.
The flange of the socket is welded by robots.
The chain grate is manufactured by our factory, and it is tested for 72 hours before leaving the factory to ensure that the tightness is moderate and won’t go wrong.
Precision parts processing
Advanced manufacturing technology, using assembly line automatic spinning operation.
Enhance heat transfer and raise boiler thermal efficiency.
Threaded fire pipes are highly efficient heat transfer elements for many years of research by our company. After continuous optimization, the heat transfer coefficient is 1.8 times higher than that of conventional fire pipes when the selection of thread groove depth and pitch.
Unique structural design
Disturbed flue gas to ensure complete combustion of volatiles.
The air volume accounts for about 30% of the total, and the wind speed is about 50m³.
The independent secondary draft fan makes it easy to control and adjust the wind volume and pressure.
The high-temperature smoke generated by the combustion first enters the eight-character flue on both sides of the body from the tail (in this case, the water pipe type), and the flue gas flows outside the pipe.
The flue gas cooled by the eight-character flue then enters the threaded tube (in this case the fire tube type) arranged in the drum from the front smoke box.
The flue gas will be exhausted from the rear smoke box finally, this design fundamentally solves the problem of cracking of the tube sheet of a pure fire tube boiler.
Abundant auxiliary configuration
Sow feeder: sow feeder feed fuel equally to avoid flashback
Speed control gear: design reasonable rotating speed according to the combustion speed of biomass to make sure the fuel burning out.
Panels: cold-rolled embossed and concave-convex panels, strong and elegant.
Inspection door: reasonable manhole and hand hole layout, easy to maintenance. Furnaces are equipped with access doors for easy access and maintenance.

Item

MODEL
DZL0.7-0.7/95/70-M DZL1.4-0.7/95-70-M DZL2.8-0.7/95/70-M DZL4.2-1.0/115/70-M
Rated thermal power(t/h/MW) 0.7 1.4 2.8 4.2
Working pressure(MPa) 0.7 0.7 0.7 1.0
Rated output water temperature(℃) 95 95 95 115
Return water temperature(℃) 70 70 70 70

Heating area(㎡)
Body 32.4 46.0 106.89 126.7
Economizer(㎡) 12.51 35.2 38.5 78.5
Effective area of great(㎡) 2.05 3.70 5.30 8.32

Available Fuel
Coal AII、P、WII
Low heating value(KJ/kg) 21000
Fuel consumption(kg/h) 196 392 784 1176
Thermal efficiency(%) 79.00 79.00 79.00 79.00
Weight of biggest part of transportation(t) 13 22 30 23
Overall dimension of boiler transportation LxWxH(m) 5.2x2.0x2.9 5.7x2.5x3.5 6.6x2.6x3.6 7.3x3.2x3.6
Overall dimension of boiler assembled LxWxh(m) 6.0x3.5x4.1 6.0x3.9x5.0 7.2x4.0x4.9 8.0x5.1x6.0

CONTACT FORM



  • composite boiler gas fuel - realschule-mechernich.de

    composite steam boiler in Food Industry. composite steam boiler is very important for food processing industry, it can be used for drying, disinfect, curing, distillation, and sterilization. It is suggested to use oil, gas, solid biomass fuel, and electric as the boiler fuel when generate steam, as the advantages of low pollution, low cost, and

    Get a Quote
  • Flue gas - Wikipedia

    2019-10-14 · Flue gas is the gas exiting to the atmosphere via a flue, which is a pipe or channel for conveying exhaust gases from a fireplace, oven, furnace, boiler or steam generator.Quite often, the flue gas refers to the combustion exhaust gas produced at power plants.Its composition depends on what is being burned, but it will usually consist of mostly nitrogen (typically more than two-thirds) derived

    Get a Quote
  • Boiler Fuels, Emissions and Efficiency - CED Engineering

    2015-8-5 · Another boiler fuel is referred to as biomass. Biomass is renewable organic matter. Propane Propane is a heavy gaseous fossil fuel processed from crude petroleum and natural gas.6 Residual oil Crude oil and fuel oil Nos. 1 and 2 that have nitrogen content greater than 0.05 wt %, The chemical composition of coal is also determined in a

    Get a Quote
  • High temperature corrosion in a biomass-fired power boiler

    2013-6-12 · deposit composition, flue gas flow, boiler design, combustion characteristics and flue gas composition. Therefore, the corrosion varies from plant to plant and the laboratory experiments should be complemented with field tests. The present project may thus

    Get a Quote
  • Effect of fuel blend composition on the efficiency of

    The impact of a fuel blend composition (in terms of biomass type and content), and process temperature on the total gas and hydrogen yields, gas composition, carbon conversion rate and process efficiency was studied. The major findings are presented below. 3.1.

    Get a Quote
  • Boiler Flue Gas Composition - halloweenraamsdonk.nl

    What is the composition of the natural gas steam . 2019-9-6·What is the composition of the natural gas steam boiler? 2019/07/25. 1. Furnace: A value that ensures that the boiler fuel is burned out and the outlet flue gas temperature is cooled to a safe working condition on the convective heating surface.

    Get a Quote
  • Improve Your Boiler's Combustion Efficiency

    2013-5-2 · Improve Your Boiler's Combustion Efficiency Combustion Efficiency Operating your boiler with an optimum amount of excess air will minimize heat loss up the stack and improve combustion efficiency. Combustion efficiency is a measure of how effectively the heat content of a fuel

    Get a Quote
  • NATURAL GAS SPECS SHEET - NAESB

    2019-9-30 · ISO 15403:2000 Natural gas -- Designation of the quality of natural gas for use as a compressed fuel for vehicles . Print Chemical Composition of Natural Gas Natural gas is a naturally occurring gas mixture, consisting mainly of methane. While most of the gas supplied to

    Get a Quote
  • Adapting Boilers to Utilize Landfill Gas: An

    2016-9-26 · The firing profile is a primary consideration, regardless of the boiler type, since the fuel cost savings associated with LFG must offset the costs of the LFG recovery (if a LFG collection system is not yet in place), the gas clean-up equipment, and the pipeline. Adapting Boilers to Utilize Landfill Gas: An Environmentally and Economically

    Get a Quote
  • Gas or Oil Fired Thermal Oil Boiler-yuanda

    Fuel in inside the inner coil pipe form the combustion chamber, the fuel burn inside and release heat and absorb most of the quantity of heat after radiation heating, high temperature flue gas transfer heat through convection heating surface, then go into the air preheater (or waste heat boiler) to heat the required air (or water), the low

    Get a Quote
  • What is the composition of flue gas? | AnswersDrive

    Flue gas is usually composed of carbon dioxide (CO2) and water vapor as well as nitrogen and excess oxygen remaining from the intake combustion air. It may also contain a small percentage of air pollutants such as particulate matter, carbon monoxide, nitrogen oxides, sulfur oxides and mercury.

    Get a Quote
  • Fuel oil/gas boilers P 320 - Remeha

    2016-11-17 · automatic fuel-oil or gas burner. The useful power of P 320 boilers is between 55 and 280 kW. Models available Boiler with control panel, which may be fitted with an optional Rematic 2945 C3K control unit for heating only or heating and domestic hot water production. 3.2 Composition of the range Maximum operating pressure: 6 bar

    Get a Quote
  • Properties and Operating Experience with Bagasse as a

    2014-4-17 · gas carryover. The final section will deal with stoker firing of bagasse and will examine some aspects of field operating problems. BAGASSE MOISTURE, ASH CONTENT, AND HEATING VALUE There are many characteristics and properties of waste fuels which affect their suitability and ease of use as a boiler fuel. Moisture, ash content,

    Get a Quote
  • Boiler Exhaust Gas Composition - aucentral.be

    2014-8-11 · Gas cleaning in flue gas from combustion of biomass condense and/or sublime during cooling in the boiler. Upstream of the gas cleaning installation, normally at a temperature < 200°C, we find all metals as solid particles, except mercury. Mercury evaporates during combustion and reacts Flue gas • Composition and temperature

    Get a Quote
  • gaia.lbl.gov

    2006-9-15 · Natural gas 1.5 10 No. 2 fuel oil 2.0 11.5 No. 6 fuel oil 2.5 12.5 Note: percentages may vary due to fuel composition variations Check on/off boiler controls Check that proper setting is maintained Chiller use/sequencing Turn off/sequence unnecessary chillers

    Get a Quote
  • Boilers -

    2004-3-19 · Pulverized Fuel Boilers Pulverized coal boilers fire finely powdered coal, typically with an average particle size of about 25 µm (0.001 in). Coal burns in suspension, like the combustion in an oil- or gas-fired boiler. Coal is pulverized in some type of large mill Pulverized coal is fired out into the furnace

    Get a Quote
  • Improve Your Boiler's Combustion Efficiency

    2013-5-2 · Improve Your Boiler's Combustion Efficiency Combustion Efficiency Operating your boiler with an optimum amount of excess air will minimize heat loss up the stack and improve combustion efficiency. Combustion efficiency is a measure of how effectively the heat content of a fuel

    Get a Quote
  • Furnace Oil Fired Steam Boilers Flue Gas Composition

    furnace oil fired steam boiler flue gas composition. flue gas steam generator Drum Boiler Manufacturer. Flue gas Wikipedia. 2019-1-10 · Flue gas is the gas exiting to the atmosphere via a flue, which is a pipe or channel for conveying exhaust gases from a fireplace, oven, furnace, boiler

    Get a Quote
  • 2. Composition of Combustion Gas 2.1 Fossil Fuels

    2008-10-21 · The molar balances for C, H 2, O 2 and N 2 are available to calculate the composition of the combustion gas. The moles of these four species fed in with the fuel and the air must be equal to the moles drawn off with the combustion gas. Again a differentiation is made between gaseous as well as solid and liquid fuels.

    Get a Quote
  • Boiler Combustion | CleanBoiler.org

    PM emissions are primarily dependent on the grade of fuel fired in the boiler. Generally, PM levels from natural gas are significantly lower than those of oils. Distillate oils result in much lower particulate emissions than residual oils.

    Get a Quote